WELCOME to the Laboratory Centrifuge Blog…
Error E-29 on VWR Micro Star 17R centrifuge
Is your Micro Star 17R centrifuge displaying error E-29 ? Is it stopping you from processing your samples.
We can help you get your centrifuge running smoothly again.
Simply send us your name, address and serial number of your centrifuge to mike@centrifugemarketplace.co.uk
We will then send you a free no obligation quotation to fix your centrifuge.
Error E18 on Sorvall ST40 centrifuge
Is your Thermo Sorvall ST40 centrifuge displaying Error 18 ? Is it stopping you spinning your samples ?
Let us help you by offering a free no obligation quotation to get your centrifuge back up and running free from error 18.
Simply send us your name, address, phone number and centrifuge serial number to mike@centrifugemarketplace.co.uk
How to recover samples from your Fisher Accuspin 3 or 3R Centrifuge ?
Are your samples stuck inside your Fisher Accuspin 3 or 3R centrifuge ?
If so then it is possible you have experienced a problem with the centrifuge.
We have put together a short video to show you how to recover your samples using the emergency lid release.
⚠️ WARNING ⚠️
Please leave enough time for the rotor inside your centrifuge to slow down and stop spinning. You need to be 100% sure that the rotor has stopped spinning before carrying out the manual override procedure.
Failure to do this could result in serious injury.
If you are unsure about doing this please contact a trained centrifuge engineer.
How to recover samples from your Eppendorf 5424 and 5424R micro centrifuge ?
Are your samples stuck in your Eppendorf 5424 or Eppendorf 5424R micro centrifuge ?
If so then it is possible you have experienced a problem with the centrifuge.
We have put together a short video to show you how to recover your samples using the emergency lid release.
⚠️ WARNING ⚠️
Please leave enough time for the rotor inside your centrifuge to slow down and stop spinning. You need to be 100% sure that the rotor has stopped spinning before carrying out the manual override procedure.
Failure to do this could result in serious injury.
If you are unsure about doing this please contact a trained centrifuge engineer.
Here is a link to the manual on the manufacturers website.
We always recommend following the procedure as detailed by the manufacturer, this can be found on page 41.
How to recover your samples from your Heraeus Megafuge 40 or 40R centrifuge ?
Are your samples stuck in your Heraeus Megafuge 40 or 40R centrifuge ?
Below is a short video which we have put together to help you recover your samples.
⚠️ WARNING ⚠️
Please leave enough time for the rotor inside your centrifuge to slow down and stop spinning. You need to be 100% sure that the rotor has stopped spinning before carrying out the manual override procedure.
Failure to do this could result in serious injury.
If you are unsure about doing this please contact a trained centrifuge engineer.
How to recover your samples from your Eppendorf 5810 & 5810R ?
Are your samples stuck in your Eppendorf 5810 or 5810R centrifuge ?
Below is a short video which we have put together to help you recover your samples.
⚠️ WARNING ⚠️
Please leave enough time for the rotor inside your centrifuge to slow down and stop spinning. You need to be 100% sure that the rotor has stopped spinning before carrying out the manual override procedure.
Failure to do this could result in serious injury.
If you are unsure about doing this please contact a trained centrifuge engineer.
Which centrifuge will spin the Apacor Midi Parasep® tube ?
We recently had a customer who wanted to purchase a new centrifuge to spin the Apacor Midi Parasep® centrifuge tube in a sealed bucket. The Boeco U320 centrifuge was their centrifuge of choice with 1624, 4 place swingout rotor, 1481 rotor bucket and 1492 bio lid.
They used the standard 50ml conical bottom tube adapter which holds the Apacor Midi Parasep® tube suitably in place. The 1481 metal rotor bucket and 1492 ‘screw on’ bio lid was a suitable choice for the biocontainment that it offers the laboratory.
The Apacor Midi Parasep® centrifuge tube is supplied by Apacor and you can find out more about this tube on the Apacor website (link below): –